3D Printed Shower Steamer Moulds
3D PRINTED SHOWER STEAMER MOULDS
Measurements: These shower steamer molds are approximately 60-70mm in diameter and 25-35mm deep.
It is highly recommended to order and purchase the accompanying stamp (at least 1) with the purchase of the shower steamer moils - unless you are using a press machine.
Free hard copy version of our shower steamer recipe will be sent with every purchase of a full set of these moulds.
Please note these are all now made to order and will take approx 1-2 weeks to have made.
Colours of the physical moulds may vary from batch to batch and may be grey, black, blue or red in colour.
These molds are NOT dishwasher safe and must be washed using Cold water only. Do not soak in water or use any chemicals or detergents to wash.
Hand wash with cold water then towel dry immediately after. Please do not soak molds in water as they can retain water which will activate your bath bombs or shower steamers.
Also, soaking molds will cause the bond between the layers in the molds to weaken and your mold can become fragile, damaged or unusable.
These molds are 3D printed molds and are made with PLA OR PETG plastic. They are very HEAT SENSITIVE. Do not leave molds in hot cars or in other areas that they can get hot such as garages and sheds.
When not in use store in an airtight container in a dark, cool place.